| Main components: |
- CCD television camera (TVC) with fiber optic input, equipped with a rotating ring for azimuth adjustment, external synchronization connector and USB interface (TVC can be powered by a PC);
- PC (laptop);
- external synchronization cable;
- electrical and fiber optic communication line with a computer;
- FastGlance software.
|
| Software |
|
Features of FastGlance base Software:
-
display of the entire recorded image or any of its fragments in the scale selected by the user;
-
saving recorded image or sequence of frames on the hard drive or removable media;
-
image accumulation both on a CCD matrix or in software;
-
image arithmetics (sum or subtraction of last image input with recorded file, sum or subtraction of 2 files);
-
subtraction of regular noise and constant background from the image;
-
rotation of the received image around the center of the frame by the angle selected by the user;
-
visualization of brightness profiles (intensity) of the image in a linear scale. One or two cursors can be used to set lines or areas that are used to make brightness profiles;
-
visualization of brightness profiles (intensity) of the image in a linear scale. One or two cursors can be used to set lines or areas that are used to make brightness profiles;
-
measurement of the relative brightness of the image at the point or zone set by an onscreen cursor with the possibility of stretching the brightness profile scale by 1.5; 2; 2.5 or 3; option to use automatic brightness profile scale to display maximum value on the brightness profile as 0.9 of the maximum scale;
-
measuring speed of movement of objects on images recorded with streak cameras in linear sweep or multi-frame modes;
-
digital image correction (brightness, contrast and gamma);
-
correction of photometric and geometric distortions of the image, including non-uniformity of the linear sweep coefficient;
-
Images can be displayed on screen with several options of pseudo-coloring (shades of grayscale, blue or multi-color), which helps determine increased amount of brightness levels;
-
Indication of the brightness (ADC) level overflow with white or red color. Overlight indication can be disabled;
-
creation of video clips from images recorded with streak cameras in multi-frame.
|
| Operating conditions: |
- Humidity ≤ 80%
- Temperature 283 – 308 К
- Pressure 95 - 105 kPa
|
| Main Specifications |
| |
|
CCD type
|
Kodak KAF-1301
|
|
Spectral sensitivity range, nm
|
400 – 1000
|
|
Dimensions of the photosensitive area of the CCD matrix, mm x mm
|
20,5 × 16,4
|
|
Pixel size, µm
|
16 × 16
|
|
Number of pixels
|
1280 × 1024
|
|
Bit depth of the ADC, bit
|
12
|
|
Camera gain adjustment limits, dB
|
6 – 36
|
|
PC connection type
|
USB 2.0
|
|
Length of the communication line with the computer, m:
- electrical cable
- fiber optic cable
|
≤ 5
≤ 100
|
|
Sensitivity (illumination on a CCD matrix at a wavelength of 500 nm with a gain of ~ 12 dB and a signal-to-noise ratio at the camera output equal to 1), photon/pixel
|
≤ 150
|
|
Spatial resolution on a CCD matrix at a contrast of 50%, lp/mm
|
≥ 20
|
|
Linear dynamic range, rel. units, with an accumulation time of 10 ms and gain of:
- 16 dB
- 8 dB
|
≥ 500
≥ 1000
|
|
Built-in RAM (FIFO), MB
|
8
|
|
Operating modes:
1.Continuous with single and cyclic image input and processing
2. Waiting (with external trigger)
|
+
+
|
|
Maximum triggering frequency, Hz
|
7,5
|
|
Sync input resistance, Ohm
|
1000
|
|
Supply voltage, V
|
+ 5
|
|
Power consumption, A
|
≤ 0,4
|
|
Dimensions, mm
|
84 × 44 × 61
|
|
Weight, g
|
≤ 230
|
|
| |
| Complete set |
| |
| №
|
Name
|
Q-ty
|
Note
|
| 1
|
RU-07 CCD Camera
|
1
|
|
| 2
|
External Synchronization Cable
|
1
|
|
| 3.1
|
Communication line with a computer - electric (≤ 5 m)
|
1
|
|
| 3.2
|
Communication line with a computer - fiber optic (≤ 100 m)
|
1
|
Optional
|
| 4
|
Flash drive with FastGlance software
|
1
|
|
| 5
|
Laptop with FastGlance software installed
|
1
|
Optional
|
| 6
|
User manual
|
1
|
|
| 7
|
Package
|
1
|
Case
|
|
|
